Today’s class is on patching jeans.
The Damsel has patched jeans a couple of ways, and has a certain method she likes for knee patches. Today’s class is for holes in places other than knees.
This method is . . . how shall we say . . . a utilitarian method. Not a beautiful thing, but it’s fast and it works.
From this picture you can see the Damsel’s Knight acquired a hole in an awkward spot.
This method will work for a hole in pretty much any spot, if you don’t care too much about prettyness.
Turn the offending garment inside out.
Now you need a denim scrap. The pieces you saved when you made cut-offs are perfect. If possible, find a scrap that roughly matches the color of the jeans you are patching. Cut a piece a few inches larger than the hole.
Pin it strategically over the hole. (wrong side)
Turn the jeans right side out. Lift some weights, and then cram them under your sewing machine presser foot, making sure you have the layers flat . . . the jeans and the patch, with no folds.
Set the machine for zigzag. Start sewing on the farthest edge of the hole, traveling back and forth, working your way across the hole. The Damsel found it easiest to use the machine’s reverse setting rather than trying to turn the jeans.
Liberally cover the area with zigzag stitching. The Damsel tried to catch all the frayed edges into the sewing for a neater appearance. Neato!
Turn the jeans wrong side out. You may see extra patch fabric that isn’t sewed down.
This can be trimmed off.
Now still on the wrong side, zigzag across all the cut, raw edges of the patch.
Turn right side out and inspect. Perhaps it will do for gardening around the manor. At least it will keep the rain out.
Pingback: patching jeans–”cute” method « Old School